Handleiding
Je bekijkt pagina 25 van 287
1-22
BEFORE USING THE MACHINE►LOADING PAPER
TRAY 2 - 4 (when 500-sheet paper feed tray
and stand/2x500 sheet paper drawer are
installed)
A maximum of 500 sheets of paper from size A5R to A3 (5-1/2" x 8-1/2"R to 11" x 17") can be loaded into trays 2 to 4.
If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "TRAY
SETTINGS (page 1-29)". Incorrect setting affects automatic paper selection action. It may cause print failure, printing on
paper of a wrong size or type or paper misfeeds.
Do not place heavy objects on the tray or press down on the tray.
To set the paper type or size
Press the [SPECIAL FUNCTION] key ( ) and set in [Paper Size Set] or [Paper Type Set].
► TRAY SETTINGS
(page 1-29)
1
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of paper,
go to the next step.
2
Adjust guide plates A and B to match
the longitudinal and transversal
dimensions of the paper to be loaded.
The guide plates A and B are slidable. Squeeze the
separator plate lever and slide to the desired paper size.
3
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
Bekijk gratis de handleiding van Sharp BP-20C25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | BP-20C25 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 29130 MB |