Sharp BP-20C25 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287/ 287

Afdrukken

Je bekijkt pagina 153 van 287

4-12

FACSIMILE►BASIC TRANSMISSION METHODS

TRANSMISSION BY AUTO-DIALLING

(SPEED DIALLING AND GROUP DIALLING)

Instead of entering a full fax number with the numeric keys, you can send a fax by pressing the [SPEED] key ( ) and

entering a 3-digit number. To use an automatic dialling, the 3-digit number and name and fax number of the destination

must first be stored. See CONVENIENT DIALLING METHODS (AUTO-DIALLING)

(page 4-6) for information on

auto-dialling and STORING, EDITING, AND DELETING AUTO-DIAL

NUMBERS (SPEED DIAL NUMBERS, AND

GROUP DIALS) (page 4-38) for information on programming auto-dial destinations.

1

Enter the 3-digit number with numeric keys.

• Enter the 3-digit number entered when the Speed Dial number or Group Dial was programmed.

• If you make a mistake, press the [C] key and then enter the correct number. If you enter a 3-digit number that is not

programmed in the machine, press the [C] key and then enter the correct number. If you do not know the Speed Dial

number, print out the "Speed # List" or "Group List".

► PRINTING LISTS OF PROGRAMMED

INFORMATION AND SETTINGS (page 4-46).

2

Press the [OK] key.

Check the destination. If correct, press the [OK] key again.

To cancel transmission

To cancel transmission while "Reading" appears or before the [READ-END] key ( ) is pressed, press the [C] or [CA]

key. To cancel a transmission job that is already stored, press the [FAX STATUS] key ( ) and cancel the job as

explained on Cancelling a fax transmission

(page 4-21).

• A job number (3 digits) appears in the display with "Read End" when transmission is performed. If you make a note of

this number after performing a broadcast transmission, you can use the number to check the results of the

transmission in the transaction report or activity report.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287/ 287

Bekijk gratis de handleiding van Sharp BP-20C25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Printer