Handleiding
Je bekijkt pagina 151 van 287
4-10
FACSIMILE►BASIC TRANSMISSION METHODS
Using the document glass
1
Make sure that the machine is in fax
mode.
The FAX indicator is lit when the machine is in fax mode. If
the indicator is not lit, press the [FAX] key ( ).
If user authentication has been enabled for the fax function
in the system settings, a message will appear prompting you
to enter your user number when you switch to fax mode.
Enter your account number (5 digits) with the numeric keys.
► User Authentication
(page 6-12)
2
Place the original.
Place the original on the document glass.
► DOCUMENT GLASS (page 1-33)
This is a single transmission operation, and therefore originals cannot be scanned in succession from both the
document feeder and the document glass.
3
Specify the original size.
Select the "Orig. Size" on the right menu.
The paper size can be selected
AB type:
A3, B4, A4, A4R, A5, A5R, B5, B5R
Inch type:
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11"R, 8-1/2" x 11", 5-1/2" x 8-1/2"R,
5-1/2" x 8-1/2"
Specify a frequently used original size.
Select the setting in [System Settings] → [Fax] → [Sending Function] → [Orig. Size Enter].
4
If needed, adjust the resolution and exposure settings.
5
Dial the fax number.
• The entered number appears in the message display. Up to 50 digits can be entered. If you make a mistake, press the
[C] key and then enter the correct number.
• Redialling and automatic dialling can also be used (►page 4-6
, ►page 4-12).
• To enter a pause, see Entering a pause
(page 4-11).
A4
A4R
B5
Bekijk gratis de handleiding van Sharp BP-20C25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | BP-20C25 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 29130 MB |