Handleiding
Je bekijkt pagina 5 van 84
EN
“eARC” to the HDMI input on the external audio device bearing the “ARC”
or “eARC” text.
(A)
(B)
HDMI (ARC) HDMI (ARC)
(A) AV receiver or sound bar
(B) HDMI cable (not supplied)*
NOTE:
To ensure proper operation of the eARC function, use an HDMI cable
labelled “HDMI High Speed with Ethernet” or better.
Additional settings for HDMI ARC connection
For this connection to work, HDMI CEC must be enabled on the TV. To do
this, press
(TiVo) button, then select [Settings] > [Sources], scroll down
and activate [HDMI CEC].
Additional settings for HDMI ARC/eARC connection
HDMI ARC must be activated in the menu. To activate it, press the
(TiVo)
button, then select [Settings] > [Sound] > [Audio Output Path] and make
sure that [HDMI eARC] is selected.
Control of volume can be achieved via the TV remote control (CEC must
be turned on).
When ARC/eARC is working, the sound from the TV speakers will be muted.
If your connected audio system is not producing sound, it is possible
that it does not support the required codecs. In such cases, you can try
allowing the TV to decode the sound. Press the
(TiVo) button and select
[Settings] > [Sound] > [Digital Audio Format] > [PCM].
[Dierences between ARC and eARC explained]
If your external audio system only supports the HDMI ARC function, the
TV will only be able to transmit compressed audio with a maximum of 5.1
channels.
If your external audio system supports the HDMI eARC function, the TV will
be able to transmit uncompressed audio with a maximum of 7.1 channels.
Transmission of object sound, such as Dolby Atmos and DTS:X, is also
supported.
Digital Audio (Optical)
Connecting your TV and audio system with adigital optical cable.
Connect to the audio system digital optical input terminal.
Digital Audio In OpticalDigital Audio Out Optical
(A)
(B)
(A) AV receiver or Sound bar
(B) Optical audio cable (not supplied)
NOTE:
When using the digital optical output for an audio connection, it is
important to disable the TV’s internal speakers to avoid any echo eects.
To do this, press
(TiVo) button and select [Settings] > [Sound] >
[Audio Output Path] > [Optical S/PDIF]. This will disable the TV’s internal
speakers.
If your connected audio system is not producing sound, it is possible
that it does not support the required codecs. In such cases, you can try
allowing the TV to decode the sound. Press the
(TiVo) button and select
[Settings] > [Sound] > [Digital Audio Format] > [PCM].
RCA Analogue Audio Cable
Connect to the audio system’saudio input terminal.
R W
(A)
(B)
Audio R / L
L
R
Earphone
(A) AV receiver or Sound bar
(B) Audio cable (not supplied)
NOTE:
The output audio level is dependent upon the headphone level. The
volume level on the connected audio system must be turned up.
Connecting Headphones
You can connect wired headphones to the TV.
Connecting Wired Headphones
(B)
Earphone
When wired headphones are connected to the 3.5mm jack socket of the
TV, the internal speakers will cut out. The volume of the sound which
comes from the headphones is controlled via the remote control using the
[VOL+] and [VOL-] buttons.
First Time Installation
When the TV is turned on for the rst time it will enter installation mode. It
is recommended that all steps are completed to ensure correct operation.
Use the[BACK] button on your remote control to return to the previous
screen.
Bekijk gratis de handleiding van Sharp 40HE3245E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | 40HE3245E |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 17109 MB |
