Shark PowerDetect RV2800YEUK handleiding
Handleiding
Je bekijkt pagina 5 van 39
sharkclean.eu
SET-UP YOUR SHARK ROBOT & NEVERTOUCH BASE
1
Insert Odour Cartridge
Note: Not included on all models
Note: Make sure the odour cartridge is installed
in the base before using the robot.
ROTATE TO CLICK
INTO PLACE
INSERT CARTRIDGE INTO
THE TOP OF THE BASE
2
Set Up Base
1. Remove all plastic wrap
and foam.
2. Find a permanent
location for the base
in a central area with a
strong WI-FI signal.
3. Ensure the base is not
placed in area with direct
sunlight.
4. Plug in the base. The
LED will turn green
when it is powered on.
0.6m
0.3m
0.3m
3
Install Ramp On Base
1. Align the flat side of the
ramp with the bottom of
the base.
2. Lift the ramp slightly
above the base, align,
and press down until the
ramp clicks into place.
3. Leave at least 0.6m of
hard floor space in front
of the base, starting from
the end of the ramp.
5
Attach a Side Brush
to Bottom of Robot
1. The side brush can be
found inside the robot
box.
2. Align the hole in the
brush over the peg on the
bottom of the robot, then
press down on the brush
until it clicks into place.
Side Brush
6
Slide Robot Onto Base
1. Align the robot with the
Shark logo upside down,
then slide it up the ramp,
onto the base.
2. The LEDs on the base
will turn green when the
robot is charging.
3. After 10 to 15 seconds,
the robot will begin to
evacuate dust and debris
into the base.
7
Download & Explore
SharkClean App
or press the Dry icon on your robot
to start a dry clean.
App Features
✔ Mapping
✔ Scheduling
✔ No-Go Zones
✔ Cleaning Reports
4
Fill The Clean Water Tank
1. Lift the water tank o the
front of the base.
2. Fill the tank up to the
MAX fill line with room-
temperature water.
Reinstall the tank.
ENGLISH
Bekijk gratis de handleiding van Shark PowerDetect RV2800YEUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Shark |
| Model | PowerDetect RV2800YEUK |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4136 MB |
