Shark PowerDetect RV2800YEUK handleiding
Handleiding
Je bekijkt pagina 21 van 39
sharkclean.eu
MAINTENANCE OVERVIEW
Component Frequency Replacement Part(s)
Robot Maintenance
BEFORE PERFORMING ANY MAINTENANCE, POWER OFF YOUR ROBOT.
TO DO THIS, PRESS AND HOLD THE DOCK ICON ON THE ROBOT FOR 5-7 SECONDS.
REMOVE THE ROBOT WATER TANK.
Mop Pad
NOTE: After a wet clean mission,
the NEVERTOUCH PRO base
will automatically wash the
robot mop pad. Regardless, it
is recommended to clean the
mop pad in the washing machine
or replace the pad every three
months or as needed.
Every 3 months,
or as needed
4918K2800WDEU
4917K2800WDEU
4938K2800WDEUK
Sensors and Charging Contacts
Every 30 days,
or as needed
N/A
Side Brush As needed 58MMSB2PKEUK
Sensor Name Functional Description
Cli Sensor
Cli sensors monitor the cli to avoid falling by
way of infrared ranging. If there is a downward
stair in front (e.g. the height of the white ground
is greater than 50mm, or the black ground is
greater than 30mm), the reading value of the
sensor exceeds the preset value, then robot stop
moving forward.
Lidar Sensor
Lidar sensor help robot map through laser
ranging. Detective distance is 8m.
3D Sensor
With 2 line-lasers and an IR camera, the 3D sensor
scans the objects to identify the image through
algorithms. FOV: H=100°, V=78.7°.
Wall Follow Sensor
Wall follow sensor detects the distance between
the objects and the left side of the robot by the
TOF ranging. Detective distance is 30mm.
ENGLISH
Bekijk gratis de handleiding van Shark PowerDetect RV2800YEUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Shark |
| Model | PowerDetect RV2800YEUK |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4136 MB |
