Handleiding
Je bekijkt pagina 21 van 108
- 21 -
Transport of the appliance
• During the transport, you have to
secure all loose parts in and on the
appliance, in order to prevent damage.
• The appliance should not be trans-
ported in a vertical position and at the
same time not tilted over more than
30 degrees. Wait 30 minutes after the
installation, before you connect the
appliance to the mains.
• If the appliance was transported with
a tilt of more than 30 degrees, wait 4
hours before you connect the appliance
to the mains.
Before the initial operation
• Remove the protective sheets and all
packaging material incl. the transport
securing of the storage spaces and of
the trays from the appliance.
• Dispose the packaging professionally.
• You might notice a slight ‘new smell’
when you start the appliance for the
rst time. It goes away once the appli-
ance begins to cool.
• Clean the interior with tepid water
with the addition of washing-up liquid.
Clean the equipment separately with
rinsing water, not in the dishwasher.
• Before you ll the appliance with food,
let it work for 1 hour, so that the target
temperature can be reached. To make
sure your goods are fully frozen, wait
3 hours before taking them out of the
freezer.
Installation of the appliance
• The appliance should be installed in a
dry and well-aired room.
• The appliance can be operated at a
humidity of max. 70 %.
• The surrounding temperature, at which
the appliance can be operated, can be
taken from the appliance specication
sheet at the end of this manual.
• Do not install the appliance outdoors.
• Bear in mind that you can pull the
power plug anytime.
• Protect the appliance from direct inso-
lation. It should not be installed near
heat sources (stove, heater, etc.). If
this, however, cannot be avoided, you
should put isolation between the heat
source and the appliance.
• You must not imbed the appliance in a
cabinet. The installation of the fridge
directly under a board or a cabinet is
disallowed.
• The unevenness of the oor can be
compensated with the two vertically
adjustable screw-in feet in the front, so
that safe stability is attained.
Bekijk gratis de handleiding van Severin RKG 8893, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Severin |
| Model | RKG 8893 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 12005 MB |
