Handleiding
Je bekijkt pagina 17 van 92
104 x 142 mm
17
Troubleshooting
In the case of problems, the following error messages may appear on the display:
Error message Cause Action to be taken
E01
The mains voltage is
below 160 V.
Connect the unit to an outlet installed in
accordance with the regulations, with a
supply voltage between 220 and 240 V.
E02
The mains voltage
exceeds 270 V.
Connect the unit to an outlet installed in
accordance with the regulations, with a
supply voltage between 220 and 240 V.
E03 Internal fault Contact customer service.
E05
The appliance is
overheated or standing
on the metal countertop.
Switch off the appliance, unplug it
from the mains and allow it to cool
down. Do not use the appliance on
metal countertops. If the error persists,
contact the customer service.
E06 Internal fault Contact customer service.
E07
The cooking temperature
exceeds 240 °C.
Turn the unit off, disconnect it from
the mains and allow it to cool down.
Contact customer service if the problem
occurs repeatedly.
E08 Internal fault Contact customer service.
The unit is in
stand-by mode, no
information shows
on the display, and
beep signals are
heard
Unsuitable cookware
(non-magnetic base,
diameter less than
18 cm)
See ‘Suitable cookware’ section
Bekijk gratis de handleiding van Severin DK 1033, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Severin |
| Model | DK 1033 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7040 MB |