Setti+ SWS400 handleiding
Handleiding
Je bekijkt pagina 8 van 10
8
49
parts using the designated notch. Remove
the used battery and install a new, fully
charged, and specification-compliant
battery. Then, carefully reassemble the
housing, it will only close in one specific
position, so do not use excessive force.
INSTALLATION
AND APPLICATION
The device should be installed near a
50
location where there is a risk of water expo-
sure. Place the sensor on a flat surface or
attach it using double-sided tape, ensuring
that the pins indicated in the description are
not obstructed.
INSTALLING THE APP
1.
Download the Setti+ app from the
website by scanning the QR:
51
2. Turn on Bluetooth connectivity in your
phone and open the installed app.
3. As a new user, set up a new account. If
you already have an account, log in with
In Google Play look
for Setti+
In App Store look
for Setti+
52
your access data.
4.
Press and hold the function button inside
the sensor battery compartment until
the device LED starts to flash.
5. Open the “Setti+” app, press “+” in the
top right corner and select “Add Device”.
The app will automatically search for
the device, select „Add”, tap „+” to add
it, then select „Finished”.
6.
After successfully connecting the device,
you can enjoy its remote operation.
53
Detailed instructions for using the device
are available at the https://setti.pl/wsparcie/
aplikacja website or after scanning the follo-
wing QR code:
54
DECLAR ATION
ART-DOMSp.z o.o. hereby certifies that the
SWS400 flood sensor complies with the
relevant requirements of the Union harmo-
nisation legislation: Directive 2014/53/EU and
other Union harmonisation legislation. The
full text of the EU declaration of conformity is
available at the following address:
https://www.artdom.net.pl/deklaracja/SWS400/
55
TROUBLESHOOTING
ISSUE POSSIBLE CAUSE SOLUTION
Sensor failed
to detect
flooding.
The sensor battery
is discharged.
Replace the sensor
battery.
Unable to
connect to
the device.
The sensor is
currently configured
with another device.
Reset the sensor
according to item 4
in the “Installation
of the SETTI+ app”
section
Low battery. Replace the sensor
battery.
Bekijk gratis de handleiding van Setti+ SWS400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Setti+ |
| Model | SWS400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1736 MB |