Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 96 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 96 of 124
Formatting from pc
The eMMC memory is recognised by the PC as an external drive with the XPT800 model name. The
format command available on Windows determines the formatting of data and settings as described
in the warning at the beginning of the paragraph. On the next reboot, the sound level meter's operat-
ing system restores the device's default settings (please note that the microphone serial number
must be restored. See XPT80X_SLM_Config).
Formatting details:
•
Format: exFAT
•
Size of allocation unit: 32kilobyte
•
Label: XPT800
15.2 Restoring Parameters to Default Settings (Reset)
Resetting the settings resets the setup parameters to the default settings.
Warning!
The Reset procedure, if a formatting has been performed, does not restore all previous
conditions.
The reset procedure does not delete:
•
Measurement data files (unit:\XPT800_xxxxxxxxx\Measure)
•
Measurement settings (unit:\XPT800_xxxxxxxxx\Setup)
•
Calibration history
To perform a reset, follow this procedure:
1
Ensure that no measuring and recording is in progress.
2
Make sure you have saved any configurations being edited in APPLICATION MANAGER.
3
In the ICON MENU, press the SYS-FUNC icon to access the
system configuration menus.
4
Access the INITIALISATION and PROCEDURE pages.
5
Touch on INIT SETUP. To confirm the operation, press OK, to
cancel press CANCEL.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
