Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 9 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 9 of 124
2 Compliance and directives
Acoustical Directives
The product meets the following class 1 specifications.
Sound Level Meter:
•
IEC 61672-1 (2013) class 1
•
IEC 60651 (1979) plus amendment 1 (1993-02) and amendment 2 (2000-10), type 1
•
IEC 60804 (2000-10) type 1
•
ANSI S1.4-1983 plus ANSI S1.4A-1985 amendment type 1 (sound level meter)
•
ANSI/ASA S1.4-2014 class 1
•
ANSI S1.43-1997 type 1
Octave band and fractional octave filters:
•
IEC 61260-1 (2014)
•
ANSI/ASA S1.11-2014 Part 1
Homologation in accordance with IEC 61672-1 (2013) and IEC 61260 (2014) is pending.
IEEE 802.11 (Wi-Fi) certifications:
XPT80X sound level meters contain IEEE 802.11b/g/n certified RF module.
FCC ID:
QOQWGM160P IC
ID: 5123A-WGM160P
KC: R-C-BGT-WGM160P
TELEC: [R] 005-102265
FCC and IC notices
Notice: This device complies with Part 15 -15.247(a2) and 15.247(b) and 15.249 of the FCC Rules and
with Industry Canada (IC) licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Notice: This equipment has been tested and found to comply with the limits for Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and radiates
radio frequency energy, and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
