Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 80 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 80 of 124
11 Managing measurement data files
Each time a measurement with logging is performed, a folder is created in the active storage device
containing data files with the extension *.dodl and other file types.
The folder path is as follows:
Unit_name:\XPT800_My_serial_number\Measure\yyyyMMdd_hhmmss\
.
If the parameter SETTINGS > DATALOGGER> SETUP> Log_sequence = OFF, the instrument creates a
folder with the start date and time of the new acquisition in the name. In this way, each measurement
corresponds to a new folder.
If the parameter SETTINGS > DATALOGGER > SETUP> Log_sequence = ON*, the measurements are
stored in the same folder and the name of each data file is preceded by a sequential numbering such as:
0001_globals.dodl, 0002_globals.dodl for globals-type data files, or 0001_history.dodl,
0002_history.dodl for time history-type files, and so on for other types of data files such as Reports,
Events, etc..
Although the XPT800 instrument has 4GB of available internal memory and a µSD memory slot (TBA),
other storage options are available:
•
USB-C: external storage device
•
Cloud: manual or automatic upload of data to NS-Storage web service
11.1 Setting the data file storage unit
The instrument allows you to use the internal eMMC memory or alternatively an external USB-C drive.
Selection of memory to be used is automatic:
•
if NO external drive is inserted, the storage location is automatically set to the internal eMMC
memory
•
if an external drive is inserted on USB port, the storage location is automatically set to the ex-
ternal USB-C type drive.
11.1.1 Saving data to an external USB-C drive
As an alternative to the internal eMMC memory, external USB-C type storage devices can be used for
data storage by plugging into the connector on the bottom panel.
To enable writing onto the external storage device:
•
switch OFF the instrument
•
plug the device into the USB-C port
•
switch the instrument ON (in some cases, inserting the device automatically switches the in-
strument on).
Storage on an external USB device is indicated by the icon on the status bar.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
