Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 60 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 60 of 124
9.7 Set alarms on exceedances
The function allows specific actions to be automatically triggered when specific conditions are
reached such as exceeding a certain noise level detected by the instrument for a certain acoustic de-
scriptor. Reaching the triggering conditions can, for example, automatically generate recording of the
audio signal when the noise level exceeds a certain value and stopping recording when the level re-
turns below the set value.
1
In the ICON MENU, tap on the MEASURE icon to access the
measurement panel.
2
Tap on the SLM parameter to be set.
3
Select the parameter used for exceedance/alarm, to change
the parameter to be set see chapter “9.3 Select acoustic pa-
rameters to be displayed” on page 54.
4
Tap the bell to activate (the bell turns red when active).
5
Tap the three dots to set the threshold.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
