Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 39 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 39 of 124
6 Switching on and off
6.1 Switching on
1 Press the ON key briefly:
•
the white LEDs of the LEFT/RIGHT buttons light up
•
the green LED of the ON button blinks
•
the screen turns on
•
the splash screen is briefly displayed
•
the main screen appears (ICON MENU)
Note: If Auto-Load setting (10.4.3) is active, the
SLM measurement screen appears directly
6.2 Display auto-off function
The function, if activated, turns off the display after a predetermined time. Refer to chapter “7.4.2
Setting the display auto power off” on page 44 to enable, disable or set this function.
With Timer display function active ( icon present in the drop-down menu):
•
successively access the pages SETTINGS > INTERFACES > DISPLAY and set a time between 1’
and 1h;
•
if the instrument is not used, the display will turn off after the set time;
•
press any key or the display to exit the stand-by mode.
With display timer function NOT active ( icon present in the drop-down menu):
•
the display never turns off even if the instrument is not used for a long time.
Notice!
Using the instrument with stand-by function NOT active significantly reduces battery life, it
is highly recommended to use this function.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
