Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 112 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 112 of 124
20.1 Exceedances settings
One or more of the acoustic parameters set and displayed in the SLM screen can be used to trigger.
The parameters selected and activated to generate the trigger will be available as input for the trig-
ger. In the case of several activated parameters, it will be possible to combine them (OR/END logic)
together to generate advanced multi-parameter triggers.
Tap on one of the parameters on the SLM screen to access the
panel relating to the parameter on which a trigger is to be activat-
ed; from there, use the three dots to set the relevant parameters
such as the exceedance thresholds that trigger on and off, the
mode and duration.
20.1.1 Exceedance of SLM parameters
Reaching the set conditions for exceedances can be used to generate a trigger. The trigger, once acti-
vated, can generate a specific action (e.g. the automatic recording of an audio signal).
• Set the exceedance activation MODE (see “20.1.2 Ex-
ceedance SLM mode (Exc_slm_mode)”)
• Set activation threshold value (MAX)
• Set deactivation threshold value (MIN)
• Set minimum exceedance duration time (duration filter)
for trigger activation (see “20.1.4 SLM exceedance dura-
tion filter (Exc_slm_duration)”)
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
