Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 102 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 102 of 124
Display
4.3” touch, 480x800px, colour TFT, high brightness, sunlight readability. Au-
to brightness.
Keyboard
ON/OFF/MENU key with RGB backlight; Function keys (2x); Multi-colour
Status Indicator.
Battery
Type
Rechargeable battery pack, Li-Ion polymer, 9000mAh. PCM circuit for bat-
tery protection
Operating time
> 24h
Wireless
Wi-Fi
Embedded Wi-Fi module (IEEE 802.11 b/g/n), for web communication and
time sync
GSM
Embedded 4G-LTE modem module for web communication and time sync
Hardware interface
USB-C
USB-C, OTG 2.0. MS (Mass Storage) and CD (Communication Device)
Ethernet
RJ45 10/100 Ethernet for web communication and time sync
Aux
RJ12: auxiliary connector for external devices as Meteo stations (Meteo in-
terface)
Audio I/O
3.5mm 4-pin audio jack: audio I/O and trigger I/O
Localization
GPS
Location tracking, time synchronization
Physical
Dimensions: 304x86x38 mm. Weight: 505 g (incl. batteries). Dust and wa-
ter-resistant case (IP Rating pending). Standard ¼” tripod mount thread.
Language
English, Italian (others TBA)
System
Status bar
Battery, GPS, Wi-Fi/Lan/4G conn., Cloud conn.level, uload/dload, notifica-
tions, date/time, active storage media, remaining storage, over-
load/underload, audio recording, active measurement mode
Monitor
Battery level [%], device temp [°C], pressure [hPa], charge voltage, pre temp
[°C]
Fw/Options
upgrade
Via USB connection or Over-the-air (OTA)
updates of firmware and new op-
tions.
Acoustic Standards
IEC
Sound Level Meter
IEC 61672-1 (2013) class 1
IEC 60651 (1979) plus Amendment 1 (1993-02) Amendment 2 (2000-10),
type 1
IEC 60804 (2000-10) type 1
Octave and fractional octave band filters
IEC 61260-1 (2014)
ANSI
Sound Level Meter
ANSI S1.4-1983 plus ANSI S1.4A-1985 Amendment type 1 (sound level me-
ter)
ANSI/ASA S1.4-2014 class 1
ANSI S1.43-1997 type 1
Octave and fractional octave band filters
ANSI/ASA S1.11-2014 Part 1
Software
Desktop
Noise Studio NS-ENS: environmental noise analysis
Noise Studio NS-SIS: buildings acoustic performance analysis
Web applica-
tions
Noise Studio NS-Storage: storage and display of measurement data
Noise Studio NS-Manager: remote management of compatible devices
Noise Studio NS-Monitor: remote management of compatible devices
Note (for more information contact sales department):
•
some hardware and firmware features may be subject to the purchase of specific options
•
some features may be under development (planned) and available later (TBA)
4.3” color active matrix TFT display with RGB and SPI interfaces
Panel
IPS transmissive type
Touch panel
5 points + gestures
Size
portrait oriented 56.16 mm x 93.60 mm active area
Resolution
480 x 800 pixels
Colors
65K / 262K / 16.7M colors
Viewing quality
free viewing direction up to angles higher than 80°, bright enhance-
ment and high reflectivity film
Contrast
800 typical
Luminance
600 cd/m2 typical
Readability
good even under sunlight thanks to high brightness led chips, BEF
(Bright Enhancement Film) and OCA bonding
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
