Senseca PRO 215-5 handleiding
Handleiding
Je bekijkt pagina 18 van 24
PRO 211-x / PRO 215-x – Differential manometers
Page 18 of 24
10 Serial communication
Serial commands can be sent to the instrument, to read the instrument information and the
measurements.
To send serial commands to the instrument, the USB mode menu item must be set to COM
interface.
In the serial communication software used
(
1
)
, the PC COM port number to which the instru-
ment is connected has to be set.
Recommended communication parameters:
• Baud rate = 115200
• Data bits = 8
• Stop bits = 1
• Parity = None
The full list of commands supported by the model, with their description, is obtained by send-
ing the following command:
GetCommandList: 0<CR><LF>
<CR> = Carriage Return
<LF> = Line Feed
Between the characters ":" and "0" of the command there is a space.
All command strings sent to the instrument must be terminated by the <CR><LF> control char-
acters.
1
Any standard serial communication software, e.g., "HTerm”, can be used.
Bekijk gratis de handleiding van Senseca PRO 215-5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 215-5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5495 MB |
