Senseca PRO 215-2 handleiding
Handleiding
Je bekijkt pagina 9 van 24
PRO 211-x / PRO 215-x – Differential manometers
Page 9 of 24
Attention!
Use hoses with a diameter compatible with the pressure ports. The inner diameter of the
hose should not be too large to avoid pressure loss and should not be too small to avoid
mechanically forcing the ports when inserting the hose.
Caution!
• Use hoses suitable for the pressure to be measured.
• It is recommended that the hoses are not under pressure during connection.
• It is recommended to secure the hoses to the pressure ports with hose clamps when
measuring pressures above 1 bar. GDZ-18 hose clamp is available as optional accessory.
The pressure ports are interchangeable. It is possible to unscrew the ports to replace them
with ports of a different type, provided they have G 1/8 thread. When tightening the ports,
use a suitable tool and observe the maximum torque of 2 Nm.
Bekijk gratis de handleiding van Senseca PRO 215-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 215-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5495 MB |
