Senseca PRO 115 handleiding
Handleiding
Je bekijkt pagina 4 van 25
PRO 111 / PRO 115 – Pt100 thermometers
Page 4 of 25
1.1 Safety information
Fault-free operation and operational safety of the device can only be guaranteed if the general safety
requirements and the specific safety requirements in this document are observed.
Do not use the device in climatic conditions other than those specified in this document.
Do not use the device in places with:
• Rapid ambient temperature variations that may cause condensation.
• Direct vibrations / shocks to the device.
• High-intensity electromagnetic fields or static electricity.
Intended use
The device is a thermometer for interchangeable Pt100 probes, designed for temperature measure-
ments with the appropriate probe, in liquid, gases, soft plastic materials and bulk materials.
Foreseeable misuse
If the following notices are disregarded, personal injury or death, as well as property damage can occur.
Danger!
• Do not use in safety / emergency stop devices!
• Not suitable for use in hazardous areas (Ex-environments)!
• Not suitable for diagnostic or other medical purposes on patients!
• Not suitable for SIL (Safety Integrity Level)!
• The device is not suitable for contact with food (use only appropriate probes)!
• Not suitable for children!
• Do not use as PPE (Personal Protection Equipment).
Caution!
Do not use if:
• There is visible damage to the device.
• The device is not working as expected.
• The device has been stored under unsuitable conditions for an extended period.
On suspicion that the device can no longer be operated without danger, it must be decommissioned
and prevented from recommissioning with appropriate labelling.
In case of doubt, send the device to the manufacturer for repair or maintenance.
Caution!
Penetration probes entail the risk of stab injuries due to the pointed probe. Handle penetration
probes with care and fit a protective cap on the probe tip when not in use!
Caution!
Risk of burns when measuring high or very low temperatures: use gloves if necessary!
Attention!
Remove batteries to prevent leakage if the device is stored at a temperature above 50 °C or not used
for an extended period of time.
Bekijk gratis de handleiding van Senseca PRO 115, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 115 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5710 MB |
