Senseca PRO 115 handleiding
Handleiding
Je bekijkt pagina 20 van 25
PRO 111 / PRO 115 – Pt100 thermometers
Page 20 of 25
10 Serial communication
Serial commands can be sent to the instrument, to read the instrument information and the
measurements.
To send serial commands to the instrument, the USB mode menu item must be set to COM
interface.
In the serial communication software used
(
1
)
, the PC COM port number to which the instru-
ment is connected has to be set.
Recommended communication parameters:
• Baud rate = 115200
• Data bits = 8
• Stop bits = 1
• Parity = None
The full list of commands supported by the model, with their description, is obtained by send-
ing the following command:
GetCommandList: 0<CR><LF>
<CR> = Carriage Return
<LF> = Line Feed
Between the characters ":" and "0" of the command there is a space.
All command strings sent to the instrument must be terminated by the <CR><LF> control char-
acters.
1
Any standard serial communication software, e.g., "HTerm”, can be used.
Bekijk gratis de handleiding van Senseca PRO 115, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 115 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5710 MB |
