Senseca ECO 531 handleiding
Handleiding
Je bekijkt pagina 7 van 24
ECO 531 - Dissolved oxygen measuring device Safety
B-H86.0.2X.DK2-4.0 Page 7 of 24
Caution
For a reliable determination of the measured value, it is important that the device with
the oxygen measuring cell are in good condition (no deposits on the electrode, ...).
In addition, it is important to carry out a correct calibration on a regular basis.
Please also refer to the corresponding chapters under "Measurement Basics" and
"Automatic calibration in the air".
Empty batteries and batteries of inferior quality can leak more easily, which can destroy
the device. Please also observe the instructions in the chapter “Operation and
maintenance”.
Note
This device does not belong in children's hands!
2.4 Intended use
The device is designed for analysis of the oxygen concentration and/or oxygen saturation in
freshwater and salt water. It is used, for example, for the monitoring of wells, sewer lines and
aquaria. A minimum flow to the sensor of approx. 30 cm/sec is necessary for a correct
measurement.
2.5 Qualified personnel
For commissioning, operation and maintenance, the relevant personnel must have adequate
knowledge of the measuring process and the significance of the measurements. The
instructions in this document must be understood, observed and followed.
In order to avoid any risks arising from interpretation of the measurements in the concrete
application, the user must have additional expertise. The user is solely liable for
damages/danger resulting from misinterpretation due to inadequate expertise.
Bekijk gratis de handleiding van Senseca ECO 531, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 531 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2756 MB |
