Senseca ECO 523 handleiding
Handleiding
Je bekijkt pagina 11 van 24
ECO 52x series - Handheld Conductivity Meter / EC-Meter
Operation
B-H87.0.0X.DK2-4.1 Page 11 of 24
4.2 Adjustment of the measuring input
With the conductivity slope correction, the conductivity value can be readjusted. The tem-
perature input can be adjusted with the zero point correction and the gradient correction. If
an adjustment is made, you change the pre-adjusted factory settings.
This is signaled with the display text T.OF, T.SL or S(L when switching on.
1 Switch the device off.
2 Hold the down button and press the On/Off button briefly to switch on the device and
open the Adjustment menu.
3 The display shows the first parameter. Release the down button.
Parameter
Values
Meaning
T.OF
Zero point correction of the temperature
0.00
No zero point correction
-5.00 … 5.00
Zero point correction in °C. (at °F -9.00 .. +9.00)
T.SL
Gradient correction of the temperature
0.00
No gradient correction
-5.00 … 5.00
Gradient correction in %
S(L
Gradient correction for the conductivity value
1.000
No gradient correction
0.800 … 1.200
Multiplier for the gradient correction
Formula used by device:
Temperature = °C: Display = (measured value - T.OF) * (1 + T.SL / 100)
Temperature = °F: Display = (meas. value - 32 °F - T.OF) * (1 + T.SL / 100) + 32 °F
Gradient correction conductivity.: Displayed value = measured value / S(L
Bekijk gratis de handleiding van Senseca ECO 523, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 523 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2462 MB |
