Senseca ECO 522 handleiding
Handleiding
Je bekijkt pagina 18 van 24
ECO 52x series - Handheld Conductivity Meter / EC-Meter
Error and system messages
B-H87.0.0X.DK2-4.1 Page 18 of 24
7 Error and system messages
Display
Meaning
Possible causes
Remedy
----
Range switches or
measured value
unstable
Impurities or air
bubbles
Measured value far
outside of the
measuring range
• Controlling instable
• Contamination or air
bubbles on cell
• Measurement
outside permissible
range
• Measuring cell
defect
Wait for the transient
effect of the controller
clean contamination /
bubbles
Keep measurement
within the permissible
range
Send in for repair
SENS ERRO
Sensor cable defect
Sensor or probe defect
Measuring range
exceeded/undercut
• Cable breakage
• Sensor or probe
defect
• Measurement
outside permissible
range
Send in for repair
Send in for repair
Stay within allowable
measurement range
No display,
unclear char-
acters or no
response
when buttons
are pressed
Battery depleted
System error
Device is defective
• Battery depleted
• Error in the device
Replace battery
Send in for repair
BAT
Battery depleted
• Battery depleted
Replace battery
ERR.1
Measuring range
exceeded
• Measurement too
high
• Measuring cell
defect
Stay within allowable
measurement range
Check the measuring
cell / send in for repair
ERR.2
Measuring range is
undercut
• Measurement too
low
• Measuring cell
defect
Stay within allowable
measurement range
Check the measuring
cell / send in for repair
SYS ERR
System error
• Error in the device
Switch device on/off
Replace batteries
Send in for repair
Bekijk gratis de handleiding van Senseca ECO 522, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 522 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2462 MB |
