Senseca ECO 410T handleiding
Handleiding
Je bekijkt pagina 6 van 22
ECO 410 / ECO 410T - O2-Analyser / oxygen meter
Safety
B-H86.0.31.DK2-2.1 Page 6 of 22
This device may only be used for control purposes when monitoring life-support or other
systems important to the user.
It must not be used instead of compulsory approval monitoring devices and it is not
designed for that purpose. If this device is used for the monitoring of such systems on its
own, the manufacturer will not assume liability for damages whatsoever.
2.3 Safety instructions
Danger!
Use caution when handling oxygen at levels above 40 vol. % O2 - high oxygen levels can
cause ignition of materials and explosion if not handled properly
Caution!
Empty batteries and batteries of inferior quality can leak more easily, which can destroy
the device. Please also observe the instructions in the chapter “Operation and
maintenance”.
Note
This device does not belong in children's hands!
Danger!
The sensor contains potassium hydroxide (GOEL 381 at ECO 410..-MAX) or acid (GOEL
370 at ECO 410..-35).
Potassium hydroxide and acids cause chemical burns!
In case of leaking liquid, avoid contact at all costs!
In case of contact:
with skin: wash off immediately with plenty of water for several minutes.
with clothing: remove contaminated, soaked clothing immediately.
with eyes: rinse under running water for several minutes, consult a doctor.
If swallowed:
drink plenty of water immediately, do not induce vomiting!
Consult a doctor.
Bekijk gratis de handleiding van Senseca ECO 410T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 410T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2524 MB |
