Senseca ECO 410T handleiding
Handleiding
Je bekijkt pagina 15 van 22
ECO 410 / ECO 410T - O2-Analyser / oxygen meter
Operation and maintenance
B-H86.0.31.DK2-2.1 Page 15 of 22
6 Operation and maintenance
6.1 Operating and maintenance notices
Note
The device and sensor must be handled with care and used in accordance with the technical
data. Do not throw or strike.
Sensor opening must be clean and dry, otherwise incorrect measurements are possible.
Plugs and sockets must be protected from soiling._
If the device is not used for an extended period of time, the batteries must be removed.
Leaks from the batteries are avoided as a result.
6.2 Battery
6.2.1 Battery indicator
If the empty frame in the battery display blinks, the batteries are depleted and must be
replaced. However, the device will still operate for a certain length of time.
If the BAT display text appears in the main display, the battery voltage is no longer adequate
for operation of the device. The battery is fully depleted.
6.2.2 Changing battery
Danger! Danger of explosion!
Using damaged or unsuitable batteries can generate heat, which can cause the batteries to
crack and possibly explode!
Only use high-quality and suitable alkaline batteries!
Caution! Damage!
If the batteries have different charge levels, leaks and thus damage to the device can occur.
Only use high-quality and suitable alkaline batteries!
Do not use different types of batteries!
Remove depleted batteries immediately and dispose of them at a suitable col-lection
point.
Bekijk gratis de handleiding van Senseca ECO 410T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 410T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2524 MB |
