Senseca ECO 240-2 handleiding
Handleiding
Je bekijkt pagina 17 van 24
ECO 240-.. - Vacuum meter | barometer Operation and maintenance
B-H88.0.1X.DK2-2.0 Page 17 of 24
6 Operation and maintenance
6.1 Operating and maintenance notices
Note
Pressure connections must be protected from soiling.
6.2 Battery
6.2.1 Battery indicator
If the empty frame in the battery display blinks, the batteries are depleted and must be
replaced. However, the device will still operate for a certain length of time.
If the BAT display text appears in the main display, the battery voltage is no longer
adequate for operation of the device. The battery is fully depleted.
6.2.2 Changing battery
Danger Danger of explosion!
Using damaged or unsuitable batteries can generate heat, which can cause the batteries to
crack and possibly explode!
Only use high-quality and suitable alkaline batteries!
Caution Damage!
If the batteries have different charge levels, leaks and thus damage to the device can occur.
Only use high-quality and suitable alkaline batteries!
Do not use different types of batteries!
Remove depleted batteries immediately and dispose of them at a suitable collection
point.
Note
Unnecessary unscrewing endangers the protection against moisture and should
therefore be avoided.
Read the following handling instructions before replacing batteries and follow them step
by step.
Bekijk gratis de handleiding van Senseca ECO 240-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 240-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2831 MB |
