Senseca ECO 230 handleiding
Handleiding
Je bekijkt pagina 16 van 20
ECO 230 barometer | altimeter
Disposal
B-H88.0.01.DK2-2.1 Page 16 of 20
1 Unscrews the Phillips screws (A)and remove the cover.
2 Carefully replace the two Mignon AA batteries (B). Ensure that
the polarity is correct! It must be possible to insert the batteries in
the correct position without using force.
3 The O-ring (C) must be undamaged, clean and positioned at the
intended depth.
4 Fit the cover (D) on evenly. The O-ring must remain at the
intended depth!
5 Tighten the Phillips screws (A).
7 Disposal
Separation by material and recycling of device components and packaging must take place at
the time of disposal. The valid regional statutory regulations and directives applicable at the
time must be observed.
Note
The device must not be disposed of with household waste. Return it to us, freight
prepaid. We will then arrange for the proper and environmentally friendly
disposal.
Private end users in Germany have the possibility of dropping off the device at the
municipal collection center.
Batteries must be removed beforehand!
Please dispose of empty batteries at the collection points intended for this purpose.
Bekijk gratis de handleiding van Senseca ECO 230, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 230 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2147 MB |
