Handleiding
Je bekijkt pagina 10 van 68
EN – 9
4. The first press of (Stop) activates the RESUME function, and after pressing (Play/Pause),
playback starts where you left off. A second press clears this memory and any playback will start from
the beginning of the disc. Opening the door also erases the RESUME memory.
Repeat Playback
During playback, press the button repeatedly to select the repeat method: REP-1 (Repeat 1), REP-
ALL (Repeat All), SHUFFLE (Random), Off.
Program CD Playback (MEM)
1. When playback is stopped, press PROG
2. Use the / buttons to select the first track, press PROG to save it to the program.
3. Repeat step 2 to store additional tracks in the program. (max. 20 steps for CD and 99 steps for MP3).
4. Pressing will start playback according to this program.
5. Press the
button once to stop the program (MEM is still lit), press it a second time or open the door
to clear the program (MEM goes off on the display).
Using a USB
Using a USB memory is very similar to using a CD.
For playback, choose a USB flash memory of maximum 128 GB, with one FAT32 formatted partition. Use
branded memory, without protection or lock. The USB memory must be plugged directly into the device.
Do not use a USB extension cable to avoid data transmission failure or interference.
AUX Input
You can connect an external audio source (MP3 player, phone, etc.) with your own cable to the 3.5mm
stereo jack. Set the appropriate volume on the external source (e.g. 70%) and this device.
GENERAL SETTINGS
During Standby, press MENU for 2 seconds to adjust the following general settings:
● Alarm
● Time
● Backlight:Low,Medium,High
● Language:English,German,Polish,Czech,Slovak,Hungarian
● FactoryReset–youcanreturnallsettingstotheiroriginalvaluesandclearthememories
● Softwareupgrade–softwarecanbeupgradedfromUSB
● SWversion–displaysthesoftwareversion:Checktheversionofsoftware.
Note about the update:
Use only software approved and supplied by the manufacturer for software updates. Use of other
software may cause irreversible damage to the device that is not covered by the warranty.
Using Headphones
You can use your own wired headphones in the 3.5mm jack. Plugging them in disconnects the
device's speakers. Before plugging in, turn the volume down to minimum and gradually increase it after
plugging in the headphones.
Caution:
protect your hearing and do not listen at high volumes for long periods of time.
Bekijk gratis de handleiding van Sencor SPT 7500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sencor |
| Model | SPT 7500 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 7174 MB |
