Handleiding
Je bekijkt pagina 6 van 48
EN – 6
TROUBLESHOOTING
No audio
Make sure your audio source is switched on and emitting a sound signal.
Check that the cables are connected correctly.
Check that the LED indicator is lit in a colour other than bright red.
Carefully increase the volume on the active speaker or remote control.
There is no sound through the Bluetooth connection
Make sure your audio source is switched on and emitting a signal.
Make sure the speaker is switched to Bluetooth input. The LED indicator must be permanently blue.
A fast blink means that no paired device is connected and the speaker is waiting to be paired. A slow
blink appears until pairing is complete or the audio source is not emitting any signal, e.g. by using BT
MUTE (PLAY/PAUSE).
Shorten the distance from the Bluetooth signal source. The maximum usable distance is about 10 m,
depending on the surrounding interference and obstacles. Near the range limit, the sound may be
unstable.
Reconnect the speaker on the side of your Bluetooth audio source.
Use another Bluetooth audio source.
Speaker cannot be switched on
Check the mains voltage, the power adapter, its cable and the correct connection of the power
connector.
TECHNICAL SPECIFICATIONS
Top output power: 40 W + 40 W
Noise to signal ratio: L/R: ≥ 80 dB (A)
Input sensitivity: LINE: R/L: 650 ± 50 mV
Frequency range: 60 Hz – 20 kHz
USB format: FAT/FAT32, WMA, MP3
Bass driver: 4" / 116 mm
Treble driver: 1/2“ silk calotte
Power source: supplied DC adapter, 21 V
Stand-by power: < 0.5W
Dimensions (w × h × d): 150 × 235 × 170 mm
Weight: 1.9 kg
Bekijk gratis de handleiding van Sencor SMC BS10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sencor |
| Model | SMC BS10 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 5060 MB |
