Sekonic RT-BR handleiding
Handleiding
Je bekijkt pagina 47 van 49
39
8. Troubleshooting
●
8.
Troubleshooting
If your meter is not operating properly, as you expect, please consult the following
conditions and attempt the suggested solutions before contacting Sekonic. Non-operation
can be due to incorrect, mis-setting of the meter or battery condition. Should your meter
be malfunctioning, please contact place where meter was purchased or Sekonic for
service and repair.
Condition Possible reasons What to do
Flash cannot be
triggered in Radio
Triggering Flash
Mode.
Is the radio receiver in the
ash compatible with the
meter’s transmitter? Isn’t any
other non-compatible brand or
manufacturer used?
Make sure that the transmitter
installed to the meter and the
receiver currently used are using the
same radio system.
●
broncolor website
URL: https://www.broncolor.swiss
Are the meter transmitter and
receiver set for the same Studio
Address?
Set the same Studio Address on the
transmitter and receiver.
“Radio transmitter
installed cannot be
used in this meter.” is
displayed.
Is the meter updated to the
latest rmware?
Update the meter to the latest
rmware by connecting with
Data Transfer Software which is
downloadable from our website
below.
URL: https://www.sekonic.
com/support/downloads/
dtssoftwareformacandwindows.aspx
Bekijk gratis de handleiding van Sekonic RT-BR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sekonic |
| Model | RT-BR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5250 MB |