Sekonic RT-BR handleiding
Handleiding
Je bekijkt pagina 36 van 49
28
2. About broncolor Radio System
●
5.
Press the Measuring Button 6.
The ashes in the same Studio Address will re, and the measured value (F-stop)
will be displayed.
The measured value (F-stop) is displayed in the main display and the Lamp Address
display over the selected Lamp Address in the Flash Power Control Screen.
6.
Touch [+] or [-] Button.
Touching the [+] or [-] Button will increase or decrease the power of the ash in 0.1
step for the selected Lamp Address. When holding the button longer (1 second),
the power will be adjusted in 1 (full) step.
The adjusted value will be displayed in the Adjusted Value area.
NOTICE
● The rst ash triggered by light meter is the output power set in the ash units.
● Although up to +/-9.9 steps can be set, the adjustment must be within the upper and
lower limit of the power level specication of the ash unit.
● The adjusted value will be reset to “0” when a new measurement is made, another Lamp
Address is selected, or the power is turned ON/OFF.
[Flash Power Control
Screen]
Measured Value
(F-stop)
Lamp Address Display
Main Display
[Flash Power Control
Screen]
[+] Button[-] Button
Adjusted Value
Bekijk gratis de handleiding van Sekonic RT-BR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sekonic |
| Model | RT-BR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5250 MB |