Sekonic RT-BR handleiding
Handleiding
Je bekijkt pagina 33 van 49
25
2. About broncolor Radio System
●
8.
Press the Measuring Button 6.
The ash will re, and the ash duration time and the measured value (F-stop) for
input ISO sensitivity and shutter speed will be displayed.
NOTICE
● The ash duration time and graph are displayed in the Flash Duration Analysis Radio
Triggering Mode, however, they cannot be stored in the memory. They are cleared if the
Measuring Mode is changed or the POWER switch is turned OFF.
● The incident light measurement can only be used in Flash Duration Analysis Radio
Triggering mode.
● In case of the followings, please follow “Flash Duration Analysis Cord Mode”( ).
• When ring the ash, if the ash brightness is lower than the ambient light, the meter
may fail to detect the light.
• Rapid start uorescent lamps and special lighting are sometimes mistaken for ash and
accidentally measured.
• Even if the ash does not re, when a sudden light change occurs in the light receptor,
measurement may be made.
• The waveform of a ash bulb has a slight slope and there is a possibility that the light
meter cannot recognize the ash bulb.
● If the measured ash duration time is longer than the input
shutter speed, an appropriate F-stop cannot be measured.
The yellow “Under” indication appears. In this case, slower
the shutter speed than the ash duration time and measure
again.
[Measuring Screen]
Measured Value (F-stop)
Flash Duration Time
[Measuring Screen]
Bekijk gratis de handleiding van Sekonic RT-BR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sekonic |
| Model | RT-BR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5250 MB |