SEIKI SC-1300AU6DSS handleiding
Handleiding
Je bekijkt pagina 24 van 44
24
OPERATION (Cont.)
Dishwasher salt - This is to help prevent limescale build up
The dishwasher’s salt chamber must be filled before starting the washing program.
In case of insufficient salt, the salt icon on the display will light up unless the
hardness level is set to HO.
After loading the dishwashing salt, the washing program must be started
immediately to remove the salt and salt water around the inner cylinder and
prevent corrosion.
1. Take out the lower dish rack and add softening salt.
2. Turn the cover of the water softener counterclockwise to open it.
3. If you intend to use the hard water softener system before using this
machine for the first time, you must use the salt funnel to add not more than
650g of salt to the salt chamber of this machine.
4. Fill the salt chamber of this machine with water only before the first use.
5. Tighten the cover again.
6. Run the rinse program without tableware.
CAUTION
Do not pour any detergent into the water softener to avoid failure.
Clean the salt particles around the water softener cover. Otherwise, the salt
solution may corrode the dishwasher and dishes.
Align the cover horizontally and rotate it clockwise for sealing properly. Loosened
cover may cause the salt solution to leak from the softener, return to the inner tank
and cause corrosion.
After adding dishwashing salt, the washing program should run without tableware.
If not, any spilled salt may cause rust or damage to the dishwasher.
Bekijk gratis de handleiding van SEIKI SC-1300AU6DSS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SEIKI |
| Model | SC-1300AU6DSS |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3622 MB |