SEIKI SC-1300AU6DSS handleiding
Handleiding
Je bekijkt pagina 15 van 44
15
INSTALLATION
SELECT A PROPER POSITION
1. Freestanding installation mode:
Please install the dishwasher on a flat and stable ground. if the dishwasher in a
cornerm at least 50mm between the dishwasher and the adjacent wall shall be
reserved to ensure that there is enough space for the dishwasher to open and
close, and reinforce it with wooden strips.
Please place the dishwasher on a firm
and flat ground.
Do not install the dishwasher on an
elevated surface.
The bare wood around this machine
shall be sealed with waterproof paint or
sealant to prevent it from expanding in
case of water.
Push the dishwasher into the cabinet of
open space and make sure that the drain
hose at the rear of the dishwasher and in
the cabinet are not knotted or stretched.
Install the dishwasher in a flat place. Do
not place anything between the ground
and the machine foot.
2. Embedded installation mode:
Please install the dishwasher on a flat and stable ground. Prepare notches on both
sides for hoses and cables. (approx. 100 mm x 75 mm). The notch should be as
close to the sink as possible in order to facilitate the connection of the water inlet
pipe and drain pipe. In order to ensure smooth drainage, the installation position of
the dishwasher shall not be more than 1m away from the water tank. Please make
necessary height adjustments before pushing the dishwasher into the installation
position.
Bekijk gratis de handleiding van SEIKI SC-1300AU6DSS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SEIKI |
| Model | SC-1300AU6DSS |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3622 MB |