Handleiding
Je bekijkt pagina 12 van 42
12
magneto-thermal breaker with a switch-contact gap of at least 3
mm.
Means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
In case the power cord is damaged, it shall be replaced either
by the manufacturer or the technical assistance service or by
specialized personnel.
The power cord shall not enter into contact with surfaces whose
temperature exceeds 50° C once the appliance has been
installed.
WARNINGS FOR OPERATION
Adequately ventilate the room when a cooker hood and other
appliances powered by energy other than electricity, are used
simultaneously (this is not applicable in case of hoods working
in the recirculation mode).
Comply with any local standard in force on air exhaust
operations.
If the appliance is used in the recirculation mode, make sure the
exhaust dust is in good conditions in case it was not used for
long.
It is not allowed to cook food over open flames (flambé) under
the hood.
Never leave pots unattended when the hob is on : oil contained
in the pot might overheat and burn. Fire risk is quite higher
Bekijk gratis de handleiding van Seenergy Incasso Vetro 76, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Seenergy |
| Model | Incasso Vetro 76 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 3735 MB |
