Handleiding
Je bekijkt pagina 9 van 19
Do not install the filter after washing until it is
completely dry.
8.1 Carbonic filters (purchased separately) used in the
recirculation mode should be replaced every 3 to 6 months
depending on the operation of the cooker hood. Filters are installed
on the T-shaped shaft of the turbofan cover by means of an axial
pushbutton and a clockwise rotation.
To replace the carbonic filters, follow the steps below:
▪ Remove the aluminium filter.
▪ (1) - Install the charcoal filter on the latch to the
stop on both sides.
▪ (2) - Rotate the charcoal filter in any direction at
an angle of 90 degrees, securing fixation
▪ Install the aluminium filter.
8.8 On the cooker hood there are installed LED
lamps to illuminate the working area of the cooker. The
lamp is replaced at a service centre.
Pic. 8
Bekijk gratis de handleiding van Seenergy Hit Line Vetro 72, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Seenergy |
| Model | Hit Line Vetro 72 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 3621 MB |
