Handleiding
Je bekijkt pagina 5 van 19
5. EXTRACTOR HOOD DESCRIPTION
5.1 Ventilation cooker hood «HIT LINE VETRO» is the air-cleaning device with transverse flow
exhaust fan (turbine) and kitted with aluminium grease removal filter. The device is produced with single-
engine of 520 mm or 700 mm in width of sheet carbon steel, followed by decorative protective coating with
powder paints.
5.2 The cooker hood refers to the type of “built-in” cooker hoods and is built into the kitchen furniture
set on the wall above the cooker.
5.3. Depending on the installation scheme over the
cooker, the extractor hood can work in two variants (see
item 1.5):
- in the mode of air extraction into the chimney of the
kitchen (Pic. 1).
- in the recirculation mode (Pic. 2) (closed circular air
circulation in the kitchen).
“It is necessary to consider, that when the extractor hood is on, the pressure is automatically
lowered in the enclosed room, and should be balanced with an inflow of fresh air. This may be
achieved by opening doors and windows or with use of equipment for special inflow ventilation”.
5.4 A cooker hood consists of the following parts (Pic. 3/3.1).
1 - cooker hood body
2 - air flue nozzle adopter (from Ø150 to Ø120 mm)
3 - electric cord with grounding
4 - switch of the cooker hood operation modes (sensor)
5 - decorative panel (external glass)
6 - decorative panel (internal glass)
7 - lightning lamp (LED stripe)
Distance H:
To electric cooker 500-750mm
To gas cooker 650-850mm
Pic. 1
Pic. 2
Pic. 3
Pic. 3.1
Bekijk gratis de handleiding van Seenergy Hit Line Vetro 52, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Seenergy |
| Model | Hit Line Vetro 52 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 3621 MB |
