Sealer Sales HL-M1120LD handleiding
Handleiding
Je bekijkt pagina 19 van 62
HL- M1120LD INSTRUCTION MANUAL(UPDATED: 2/27/24)
14
Operation
Operation Set-up
1. Our machines are equipped with a three-prong grounded plug. Make sure the plug is well-
connected in the socket to ensure safe operation.
2. Make sure the circuit breaker is in the “ON” position. (Levers pointing up)
3. First time operation. Allow the machine to pre-heat by running at a low temperature for a few
minutes. This would apply if the machine has not been in operation for a long time. The machine
can sometimes be damp from storage or shipment and running at a low temperature will dry out
any residual moisture.
4. Adjust the height of the conveyor and machine head based on the bag requirements.
Operation
Figure 9. Control Panel of HL-M1120LD
1. Our machines are equipped with a three-prong grounded plug. Make sure the plug is well-
connected in the socket to ensure safe operation.
2. Make sure the circuit breaker is in the “ON” position. (Levers pointing up)
3. Turn Power, Heat (Seal), Fan, and Printer switches to the “On” position. Belts and conveyor will
begin to move simultaneously.
4. Adjust the conveyor speed.
Bekijk gratis de handleiding van Sealer Sales HL-M1120LD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | HL-M1120LD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15685 MB |
