Sealer Sales FRM-1120C handleiding
Handleiding
Je bekijkt pagina 18 van 63
FRM- 1120C INSTRUCTION MANUAL
13
Sealer Sales | www.sealersales.com | Tel: 818-718-8818 | E-mail: contact@sealersales.com
Figure 9. (1) Driven Wheel Seat (Adjusting Block), (2) Driven Wheel Seat (Adjusting Block), (3)/(4) Adjusting Screws, (5) Springs
9. Emergency Stop – Press the emergency stop to turn off the machine. In order to restart the
machine, you must release the emergency stop by turning the knob 120˚ clockwise.
10. To shut down, turn off the heater switch and allow the temperature of the machine to drop before
turning off the power and fan switches. Following this shut down procedure will significantly prolong the life
of machine and sealing belts.
Sealing Optimization
1. Sealing performance can be adjusted with the sealing temperature and sealing speed. The higher
the speed the less exposure the material to heating blocks and therefore a higher temperature will
be required to seal the material.
2. Try a variety of different sealing temperatures and conveyor speeds to get the optimal seal for your
material.
Bekijk gratis de handleiding van Sealer Sales FRM-1120C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | FRM-1120C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19569 MB |
