Sealer Sales FR-770II handleiding
Handleiding
Je bekijkt pagina 26 van 51
FR- 770 INSTRUCTION MANUAL
21
Sealing & Printing Optimization
1. Sealing performance can be adjusted with the sealing temperature and sealing speed. The higher the speed the
less exposure the material and therefore a higher temperature will be required to seal the material.
2. Try a variety of different sealing temperatures and conveyor speeds to get the optimal seal for your material.
3. Based on the thickness of your sealing material, adjust the clearance between upper and lower heating blocks,
adjust the pressing force of the retaining washer to control the clearance between the two sealing belts, adjust
clockwise to left (increase clearance) and counterclockwise (narrow clearance). The clearance between the two
sealing belts is about equal to the thickness of one layer of bag.
4. Make adjustments to the pressing wheel with the pressure knob (Figure 19 , Item #7) to ensure a good quality
seal as well as a clear and visible embossed image.
Please note that unreasonable parameter settings may damage the machine or increase servicing needs.
The default settings on the band sealer are adjusted so that it is suitable for most bags. See our material heat sealing
temperature reference table below:
Material Thickness (µ m)
Recommended
Temp Settings (°C)
Heating Sealing
Speed
LDPE 30 - 60 105 - 150 6 - 10
MDPE 40 - 120 115 - 120 7.2 - 10.2
HDPE 40 - 90 125 - 150 7.2 - 10.2
PP 40 - 60 135 - 160 7.2 - 10.2
WARNING! DAMAGE!
Unreasonable parameter settings may damage the machine or increase
servicing needs.
Bekijk gratis de handleiding van Sealer Sales FR-770II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | FR-770II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12118 MB |
