Sealer Sales FR-770I handleiding
Handleiding
Je bekijkt pagina 6 van 51
FR- 770 INSTRUCTION MANUAL
1
Safety Instructions
WARNING!
Below are general safety precautions and warnings that should be understood
prior to setting up or operating your equipment. Read and fully understand all instructions and warnings prior to
using this unit. Your safety is most important! Failure to comply with procedures may result in serious injury or
property damage. Remember:
Your personal safety is your responsibility.
Unsafe practices or unauthorized modifications could result in accidents or property damage. Failure to follow these safety rules
and take necessary precautions can result in serious injury as well as damage to equipment.
Never operate or service your band sealer until you have read this manual completely and understand it fully.
Plug the band sealer into a standard 120 Volt, 60Hz wall outlet or surge protector. We highly suggest using a surge
protector. Some special order units are 220 Volt, 50Hz. Make adjustments as necessary.
Do not use the band sealer if the power cord, plug or any other parts are damaged. Do not to allow the power cord to
drape into your work area. Check that all parts are operating properly and perform the intended functions. Check for
all other conditions that may affect the operation.
Reduce risk of unintentional starting. Make sure the power switch is in the "OFF" position before plugging into the
power source.
Always disconnect sealer from power source before servicing, changing accessories or cleaning the unit.
To provide protection against the risk of electrical shock, the power connection must be properly grounded at all times.
Do not leave the sealer unattended when in use. Disconnect the sealer from the power source before leaving the work
area.
Band sealer is used solely for sealing thermoplastic materials. Using the machine for any other purpose can cause damage
to the machine and operator. Do NOT use the machine for any other purpose other than to seal thermoplastic materials.
Doing so may result in damage to the machine and injury to the operator.
Always operate machine on a flat stable surface.
While operating machinery, wear close-fitting clothing and tie back long hair to prevent any external items from getting
caught in the machine. Do not wear jewelry when operating the band sealer.
Bekijk gratis de handleiding van Sealer Sales FR-770I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | FR-770I |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12118 MB |
