Sealer Sales FR-770I handleiding
Handleiding
Je bekijkt pagina 25 van 51
FR- 770 INSTRUCTION MANUAL
20
Installing the Embossing Wheel
FR-770 is equipped with an embossing function. The embossing coder will continually emboss characters directly on
your bag. The coder uses pressure and does not use ink to print. The FR-770 embossing wheel is equipped for 1-line
embossing with 15 characters. There are three sections so three sets of characters are needed. Please note that all 15
characters in the three sections must be filled with a typeset. Optional feature: 2-line embossing which can be
purchased separately.
1. Place the key in the groove of the embossing wheel plate and turn counter clockwise to loosen the print wheel
plate. (Figure 13) Remove the embossing wheel plate, as well as the o-ring (Figure 14)
Figure 13
Figure 14
2. Carefully install your typesets in each of the three cavities. Once all cavities are filled, place the o-ring and print
wheel plate back in place. Using the key, carefully turn clockwise to lock wheel plate. Make sure none of the
typesets are pushed out of the cavity by holding the typesets in place as you turn the key.
Figure 15
Figure 16
3. Unscrew and remove the pattern knurled wheel on the sealer. Replace with the embossing wheel by lifting the
embossing wheel seat and pushing the embossing wheel in place. Please note that safety covers must be
removed on the band sealer before accessing the embossing wheel.
Bekijk gratis de handleiding van Sealer Sales FR-770I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | FR-770I |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12118 MB |
