Sealer Sales CS-6050 handleiding
Handleiding
Je bekijkt pagina 12 van 34
8
4.5 The installation of Long-arm assembly and tape roll support assembly
Respectively demount the Hexagon socket head cap screw ④、⑤, long-arm assembly③
and tape roll support assembly② and install in relevant position of sealing head① as
below picture shows, then tighten up Hexagon socket head cap screw ④、⑤.
Fig 4-3
4.6 Electrical connection
Danger! Electric shock!
Assure all socket equipped with protective grounding wire.
Caution! Mismatching power supply damage machine!
Please check all parameter for machine power (refer to nameplate).
Please obey operation safety guidelines and national accident prevention measures.
4.7 Power/Grounding
Check that the power supply voltage used is the same as the voltage specified on the
machine nameplate.
When the machine is connected to a three-phase power supply, check the direction of
rotation of the drive belt.
Ensure that the machine is properly connected to a grounded outlet to avoid fire or electric
shock (the ground wire is yellow-green).
The cable must be free to move to avoid squeezing.
If the cable is damaged, replace it immediately.
When the machine is faulty or needs maintenance, please cut off the power firstly.
When machine will be left idle for a long period of time, please collect the power line.
Bekijk gratis de handleiding van Sealer Sales CS-6050, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | CS-6050 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4848 MB |
