Seagate Exos AP 4U100 handleiding
Handleiding
Je bekijkt pagina 17 van 30
Chapter 2 User commands 17
setcanisterstr
Command
setcanisterstr
[
state
]
Command synopsis Changes the local I/O module safe-to-remove status.
Command description Changes an application/RAID I/O module's safe-to-remove indication status. This state is usually managed
by GEM's processor service.
The method for displaying this status may vary on a per product basis. See the product’s installation
procedures for specific details.
Command parameters
state
l
1 sets the safe-to-remove indicator state to ON.
l
0 sets the safe-to-remove indicator state to OFF.
l
If no parameters are specified: the current state of the local I/O module’s safe-to-remove indicator
state is returned.
Command type Control
Access level General
Applicable products Exos AP, Nytro AP
Supported in versions 2.0 or later
Current status Active
settime
Command
settime [format <parameters>]
Command synopsis Sets current time on the enclosure.
Command description Sets or reports the current time of the enclosure. Two time-stamp formats are supported:
l
Relative time: This is a timestamp expressed as the number of days, hours, minutes, seconds and
milliseconds since a given epoch.
l
Calendar time: This is a timestamp expressed as the full Gregorian calendar year, month, day, hour,
minute and second, with the earliest representable date being 1970-01-01 00:00:00.
I/O modules not fitted with a real-time clock default to reporting relative time, where the epoch is the point
at which the system last booted.
Bekijk gratis de handleiding van Seagate Exos AP 4U100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Seagate |
| Model | Exos AP 4U100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2385 MB |
