Scotsman UC0918GA-1AX handleiding
Handleiding
Je bekijkt pagina 8 van 29
UC GOURMET UNDERCOUNTER
pg. 9
E. C
heck to see through the ice discharge opening that the spray system is correctly seated and that the
water jets uniformly reach the interior of the inverted mold cups. Also, make sure that the plastic
curtain is hanging freely and there is not excessive water spilling through it.
F. The ice making process begins with the water sprayed into the molds that gets gradually refrigerated
by the heat exchange with the refrigerant flowing into the evaporator serpentine. During the freeze
cycle, the evaporator temperature falls to 32˚F (0˚C) (red LED blinking as per Fig. 4) and then to 5˚F (-
15˚C) (red LED ON steady as per Fig. 4a). When it reaches 5˚F (-15˚C), the evaporator temperature
sensor supplies a low voltage power signal to the electronic control device (PC Board) in order to
activate an electronic timer. This takes over the control of the freeze cycle up to the complete
formation of the ice cubes.
Bekijk gratis de handleiding van Scotsman UC0918GA-1AX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scotsman |
| Model | UC0918GA-1AX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5812 MB |
