Scotsman SCE275 handleiding
Handleiding
Je bekijkt pagina 4 van 39
The ice machine is not designed for outdoor use. It must
be installed indoors, in a controlled environment. The air
and water temperatures must not exceed rated limits.
Electrical power is supplied through a cord connected to
the unit. All local codes must be followed.
Pre-installation:
1. Inspect the place where the ice machine is to be
installed. Check for:
•
space for the cabinet,
•
water supply,
•
drain availability
•
and electrical power supply connection within
reach of the machine’s power cord.
No extension cords are allowed. The building drain inlet
must be lower than the drain outlet(s) at the back of the
ice machine. The water supply must have a hand shut off
valve accessible when the unit is installed.
2. Determine the method of installation, is the machine
to be installed under the counter? Is the drain in the floor
under the machine? Is the water inlet valve accessible?
Unpack and Assemble
1. Remove legs and scoop from storage bin.
2. Remove shipping materials from ice making area.
3. Place corner posts from the shipping carton on the
floor behind the ice machine. Tip the ice machine on its
back and remove the shipping skid.
4. Screw the legs into the threaded holes in the base of
the ice machine.
5. Tip the ice machine back to an upright position.
4
Remove Material Located Between Cube Deflector and Troughs
Bekijk gratis de handleiding van Scotsman SCE275, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scotsman |
| Model | SCE275 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4365 MB |
