Scotsman Prodigy Plus NS2030 handleiding
Handleiding
Je bekijkt pagina 12 van 20
NH2030, NS2030, FS2330
A Series Water and Remote User Manual
November 2020
Page 11
Line Set Routing and Brazing
Do not connect the refrigeration tubing until all routing
and forming of the tubing is complete. See the
Coupling Instructions for nal connections.
1. Each set of tubing lines contains a 3/8” diameter
liquid line, and a 1/2” diameter discharge line.
Both ends of each line are designed for eld
brazed connections.
Note: The openings in the building ceiling or wall,
listed in the next step, are the minimum sizes
recommended for passing the refrigerant lines
through.
2. Have a roong contractor cut a minimum hole for
the refrigerant lines of 2”. Check local codes, a
separate hole may be required for the electrical
power supply to the condenser.
Caution: Do NOT kink the refrigerant tubing while
routing it.
3. Route the refrigerant tubes through the roof
opening. Follow straight line routing whenever
possible. Excess tubing must be cut to proper
length prior to connecting to the ice maker and
condenser.
4. The tubing must be evacuated after connection
to the ice maker or condenser before opening the
ball valve.
5. Have a roong contractor seal the holes in the
roof per local codes
To Remote
Condenser
Fan Motor
Power Supply to Condenser
Refrigeration Tubing
Potable Water
Supply
Condensate Drain
*reference page 4 for more detailed layout of rear panel connections
Bekijk gratis de handleiding van Scotsman Prodigy Plus NS2030, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scotsman |
| Model | Prodigy Plus NS2030 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2775 MB |
