Scotsman Prodigy Plus FS0522 handleiding
Handleiding
Je bekijkt pagina 7 van 24
April 2025
Page 3
NH0422X, NS0422X, FS0522X, NH0622X, NS0622X, FS0822X, NH0922X, NS0922X, FS1222X, NH1322X,
NS1322X, FS1522X
A Series Air and Water User Manual
Location:
While the machine will operate satisfactorily within the
listed air and water temperature limits, it will produce
more ice when those temperatures are nearer the
lower limits. Avoid locations that are hot, dusty,
greasy or conned. Air cooled models need plenty
of room air to vent. Air cooled models must have at
least six inches of space at the back and sides for
air discharge; however, more space will allow better
performance. All models must be open in the front
and have at least 12 inches of space at the back. If an
ignition source is present in the proposed installation
area, 12 inches of space in the back is needed and
39.4 inches of space for the sides are needed to
maintain a safe distance from the nearest ignition
source. Ensure that front and sides of the machine
are accessible.
Airow
Air ows into the front of the cabinet and out the back.
The air lters are on the outside of the front panel and
are easily removed for cleaning.
Options
Ice is made until it lls the bin enough to block an
infrared light beam inside the base of the machine. A
eld installed kit is available to adjust the maintained
ice level lower. The kit number is KVS.
The standard controller has excellent diagnostic
capabilities and communicates to the user through the
AutoAlert light panel, seen through the front panel.
Field installed kits are available that can log data and
provide additional information when the front panel is
removed. The kit numbers are KSBU and KSB-NU.
See page 21.
Bin compatibility
All models have the same footprint: 22 inches wide
by 24 inches deep. Conrm available space when
replacing a prior model.
Bin & adapter list:
• B322S – no adapter needed
• B330P or B530P or B530S – Use KBT27
• B842S – KBT39
• B948S – KBT38 for single unit
• B948S – KBT38-2X for two units side by side
• BH1100, BH1300 and BH1600 upright bins include
ller panels to accommodate a single 22 inch wide
ice machine. No adapter is needed.
Dispenser compatibility
Only nugget ice models may be used with ice
dispensers. Flaked ice is not dispensable.
• IOD150 – use KBT80 and KDIL-PN-150, includes
KVS, KNUGAGT, and R629088514
• IOD200 – use KBT84 and KNUGDIV and KVS
• IOD250 – use KBT84 and KNUGDIV and KVS
See sales literature for other brand model ice and
beverage dispenser applications.
Other Bins & Applications:
Note the drop zone and ultrasonic sensor locations in
the illustrations on the next pages.
Scotsman ice systems are designed and
manufactured with the highest regard for safety and
performance. They meet or exceed UL60335-2-89.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specications and
design are subject to change without notice.
Airow
Bekijk gratis de handleiding van Scotsman Prodigy Plus FS0522, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scotsman |
| Model | Prodigy Plus FS0522 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3237 MB |
