Scotsman Prodigy Plus C2148 handleiding
Handleiding
Je bekijkt pagina 12 van 88
Adjustments
Bridge Thickness - For Service Tech Only
1 Push and hold Off till the machine stops.
2 Remove evaporator cover.
3 Remove curtain.
4 Use a box wrench and rotate the bridge
thickness adjustment screw in 1/8 turn
increments CW to increase bridge thickness.
Rotate CCW to decrease bridge thickness.
Caution: Do not make the bridge too thin or the
machine will not harvest properly. Bridge thickness
adjustments are not covered by warranty.
5 Return curtain to its normal position.
6 Push and release the On button. Check next
harvest of ice. Repeat steps 1-6 if needed.
November 2006
Page 10
C1448, C1848, C2148W
Air and Water Cooled User Manual
Ice Bridge Thickness Measurement
Too Big
Too Small
Just Right for
Small Cube
3-4 mm
bridge
Ice Thickness Sensor
Just Right for
Medium Cube
Note: Water cooled models, the refrigeration
system discharge pressure is factory set at 245
PSIG, which should yield a freeze cycle discharge
water temperature of about 105-110 degrees F.
Adjust if necessary.
Bekijk gratis de handleiding van Scotsman Prodigy Plus C2148, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scotsman |
| Model | Prodigy Plus C2148 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9157 MB |
