Scotsman Prodigy Elite MC0830 handleiding

Niet gecategoriseerd

Scotsman

22 pagina's

PDF beschikbaar

Handleiding

MC0322 through MC1030

Air and Water Cooled User Manual

June 2022

Page 10

Panel Removal

1. Locate and disengage the two quarter turn

captured screws at the bottom of the front panel.

2. Pull the front panel out at the bottom.

3. Lift the front panel up and o󰀨 the machine.

4. Remove two screws at the front of the top panel.

Lift up the front of the top panel, push the top

panel back an inch, then lift to remove.

5. Locate and loosen the screws holding each side

panel to the base. Left side panel also has a

screw holding it to the control box.

6. Pull the side panel forward to release it from the

back panel.

Model and Serial Numbers

This manual covers several models. The model

number on the product is located in two places, on the

back dataplate and on the model and serial number

tag, located behind the front panel. See the illustration

for the dataplate and serial tag locations.

Write the model and serial number of this product

here:

________________________________________

Write the day, month and year of initial start up here:

________________________________________

Switch Door

All models ship with the indicator lights visible at

the lower left front. The On and O󰀨 buttons and the

Bluetooth® button are covered by a door to the right

of those lights. The on and o󰀨 buttons and indicator

lights duplicate what is on the controller.

Uncrate and Set Up

Begin with unpacking the ice storage bin. Remove the

carton, and using part of the carton as a cushion, tip

the bin on its back to remove the skid and attach the

legs or casters.

Return the bin to an upright position. Check the bin

top gasket for gaps and tears, ll any in with food

grade sealant prior to placing the ice machine on the

bin.

Install the bin top adapter or ice dispenser adapter, if

one is required for the application.

If the ice machine has not been unpacked, do so now.

Remove the carton from the skid. Lift the ice machine

o󰀨 the skid directly onto the bin.

Note: The machine is heavy! Use a mechanical hoist

if necessary.

Secure the ice machine to the bin with the hardware

provided (two metal straps and 4 bolts).

Place the bin and ice machine in the selected location

and level it by adjusting the bin leg levelers.

Remove the white plastic covering the panels.

Dataplate

Location

5. Remove

Screws

1. Disengage

1/4 Turn

Screws

Dataplate Location and Panel Removal

Bekijk gratis de handleiding van Scotsman Prodigy Elite MC0830, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.